Concrete repair and coatings in Vaudreuil-SoulangesConcrete coating experts
Our services
SurfaTech redoes facades with the ADEX system and repairs damaged concrete, then covers it with the system made for that surface: acrylic for balconies, steps and pools, epoxy for garages and businesses. No posted prices: every slab is different and the estimate is free.
The ADEX system redoes an exterior wall from start to finish: foam insulation boards cover the facade, then one or two coats of ADEX acrylic finish it. The house is better insulated, protected from the weather and gets the colour and texture you choose.
See the ADEX system layers
The concrete is prepared and repaired, then covered with polymer cement and two acrylic finish coats. The steps get an even finish without being replaced.
See the acrylic layers
We reinforce the foundation parging with a specialized acrylic product. The concrete is protected and the base of the house looks new.
A non-slip MARTEX acrylic coating that looks better and is safer for bare feet. 5-year warranty.
See the acrylic layers
Garage, basement or shed: a flake, metallic or solid epoxy floor, laid on ground and repaired concrete. A quick mop keeps it clean.
Choose an epoxy finish
Stores, businesses, workshops, warehouses and industrial buildings: a floor that takes heavy loads and is easy to wash.
See the epoxy layersAlso: foundations
Foundation cracks
Crack injection, a waterproofing membrane and, when planned, a Delta-type protection membrane before backfilling.
See the repair stepsBefore: cracked, crumbling concrete. After: the same step, repaired then coated.
Every project starts with preparation. We clean, repair the damaged concrete, then apply the coating that suits how the surface is used. The result lasts because the base is sound.
Before
AfterHow it’s done, layer by layer
A coating lasts only as long as what lies beneath it. Pick a system, then scroll down: the cross-section builds up at each step.
CHEMTEC epoxy
- Garages, basements and commercial floors, with CHEMTEC epoxy coatings.
- 1
Grinding or sanding the concrete
Mechanical preparation opens up the concrete surface so the epoxy bonds to it instead of sitting on top.
- 2
Repairing imperfections
Cracks, holes and chips are repaired as needed. A flaw left underneath eventually shows on top.
- 3
The epoxy system
The epoxy coat chosen for the project: solid colour, flakes or a metallic finish.
- 4
The protective topcoat
A clear coat that protects the finish against wear and stains, when the system calls for it.
- Balconies, steps and pool decks, with MARTEX acrylic systems.
- 1
Surface preparation
The concrete is cleaned and prepared so the next coats bond.
- 2
Concrete repair
Damaged areas are repaired as needed, before any finish coat.
- 3
Polymer cement
A coat of polymer cement when the surface needs it. It evens out the concrete and gives it a solid base again.
- 4
First acrylic coat
The acrylic finish, in the colour you choose.
- 5
Second acrylic coat
A second coat for an even, durable finish. Around pools, the finish is non-slip.
- Exterior walls redone with ADEX acrylic systems.
- 1
Substrate preparation
The wall is cleaned and prepared to receive the system.
- 2
Membrane
A membrane applied to the substrate protects the wall from water.
- 3
Foam insulation boards
Foam boards insulate the wall from the outside.
- 4
Polymer cement with reinforcing mesh
Polymer cement reinforced with a mesh, which gives the wall its impact resistance.
- 5
ADEX acrylic finish
One or two coats of ADEX acrylic, in the colour and texture chosen from the ADEX chart.
- A crack that lets water into the basement is repaired from the outside.
- 1
Excavation
We dig along the foundation, as needed, to reach the crack.
- 2
Cleaning the foundation
The concrete is cleaned so the injection and the membrane bond.
- 3
Crack injection
The crack is injected through its full depth.
- 4
Waterproofing membrane
A waterproofing membrane covers the repaired area.
- 5
Delta-type membrane
A dimpled protection membrane, when planned, keeps water away from the wall.
- 6
Backfilling
The soil is put back along the foundation.
Choose your epoxy finish
Three finishes, dozens of colours. Pick a finish: its photos play on their own.
Flake epoxy
Coloured flakes broadcast into the epoxy. The textured finish hides dust and small marks: it’s the most popular choice for a garage.
- For
- Garages, basements, sheds, workshops
- Colours
- Over 10 flake blends, from light grey to charcoal
- Care
- A mop and soapy water
Metallic epoxy
Metallic pigments worked into the epoxy by hand. The highlights shift with the light and no two floors are alike.
- For
- Basements, living spaces, bathrooms, stores
- Colours
- Grey, silver, bronze, blue and more
- Care
- A mop and soapy water
Solid epoxy
One colour, wall to wall. The smooth, glossy finish reflects light and gives a clean floor that is easy to keep tidy.
- For
- Garages, basements, workshops, commercial spaces
- Colours
- Grey, white, beige, black and more
- Care
- A mop and soapy water
Our work
Facades, staircases, foundations, pools and floors redone by SurfaTech, in Vaudreuil-Soulanges and Beauharnois-Salaberry.
Spin the ring with your finger or the arrows.
How a project works
You get in touch
Through the form, by phone or by emailing photos of the surface to info@surfatech.ca.
We reply within 24 to 48 hours
Business hours. We look at the surface, the state of the concrete and the preparation it needs.
You receive a written estimate
Free, with the proposed system and the warranty terms. The price depends on the area and the condition of the surface.
We prepare, repair and apply
Plan on 2 to 3 days for a balcony, a staircase or a garage. 5-year warranty outdoors and 10 to 15 years on indoor epoxy.
How long before you can use it?
Pick the surface to redo: you see the system we use, how long the work takes and when you can walk or park on it.
Acrylic balconies and steps
- System
- Length of the work
- Ready to use
- Season
- Warranty
Average times. The warranty terms are written in every estimate.
Request an estimate for this project
Julien Choquet, owner and founder
What you don’t see once the floor is done is the preparation. That’s where I spend the most time.
RBQ licence 5860-9884-01. Our products: CHEMTEC epoxy, MARTEX acrylic, ADEX facade systems.
What our clients say
52 Google reviews
Nous sommes extrêmement satisfaits du résultat. Nos marches ont retrouvé une seconde vie et une très belle allure. Le travail est soigné et de grande qualité, le résultat final est vraiment remarquable. Merci pour votre professionnalisme et votre souci du détail. Nous recommandons cette entreprise sans hésitation.
Réparation et surfaçage d’un perron en béton et application d’époxy sur un plancher de garage. Totalement satisfaite du travail effectué pas Surfatech. Le résultat est au-delà de mes espérances. Merci à toute l’équipe!
Excellente expérience. Suivis rapides, service courtois. Le produit fini est super, nos escaliers à l’entrée sont comme neufs.
Surfatech est venu chez nous pour refaire le stucco. Ils ont travaillé forts et le résultat est magnifique. Je les recommande fortement.
Je tiens à souligner le très beau travail effectué par la compagnie Sufatech. Le nouveau plancher d’époxy de notre garage est magnifique et de grande qualité. Merci à Julien et à son équipe pour leurs bons conseils et leur professionnalisme. Nous allons certainement les recontacter pour de futurs projets!
Excellent travail et dans les délais. Je suis très satisfait et je les recommande. J’ai fait appel à eux suite à une recommandation positive d’amis les ayant également utilisés par le passé.
Merci a Surfatech et tout son équpie pour les travaux effectué sur mes marches d’entré. Ils ont ramené mes marches a neuf pour le 1/4 du prix de faire installer des nouvelles.
Travail impeccable!!! Le fini epoxie donne vie a votre garage. Julien de chez Surfatech sont courtois, professionel et save ce qu’il font! Je recommende Surfatech pour vos besoin d’epoxie! Merci encore!
Une compagnie sérieuse qui offre un service de grande qualité. Très bonne communication et résultat au-delà des attentes.
Entrepreneur qualifié. Le travail a été exécuté à la hauteur de nos attentes et dans les délais prévus. Je recommande!
Beau travail, équipe professionnelle tout en respectant l’horaire. Une entreprise que je recommande si vous chercher qualité et prix, Bravo!
Belle équipe professionnelle et fiable travaillant de façon minutieuse et appliquée. Je vous les recommande fortement.
Reviews posted on the company’s Google listing, quoted word for word in French. Rest your mouse or finger on a row to stop it.
Frequently asked questions
For any other question, call (514) 632-4674.
How much does a project cost?
The price depends on the area, the condition of the concrete, the preparation needed and the coating system chosen. The estimate is free and tailored to you. We reply within 24 to 48 business hours.
How long does the work take?
On average 2 to 3 days for a balcony, a staircase or a garage floor. On MARTEX acrylic you can walk after 24 hours. On an epoxy floor you can walk after 24 to 48 hours and park your car after 4 days.
What is your warranty?
Exterior work (facades, foundations, balconies, steps and pool decks) is guaranteed for 5 years. Indoor epoxy floors are guaranteed for 10 to 15 years depending on the system. The exact terms are written in each estimate.
Do you work in the fall and winter?
Yes, all year round. Epoxy floors and indoor work are done in winter too. Exterior acrylic coatings are applied from 8 °C, depending on the weather and product requirements.
Why not just paint the concrete?
Paint stays on the surface and eventually peels on concrete exposed to water and frost. Our systems start with mechanical preparation and concrete repair: the coating bonds to a sound base.
What products do you use?
CHEMTEC epoxy coatings, MARTEX acrylic systems and, for facades, ADEX systems. You can see their colours: CHEMTEC epoxy, MARTEX acrylic and ADEX.
Which payment methods do you accept?
Interac e-Transfer, cash, and debit and credit cards.
Do you repair foundation cracks?
Yes, from the outside: excavation as needed, cleaning, crack injection, a waterproofing membrane, a Delta-type protection membrane when planned, then backfilling.
Vaudreuil-Soulanges and Beauharnois-Salaberry
We work in every municipality of the Vaudreuil-Soulanges and Beauharnois-Salaberry MRCs, on Montreal’s West Island and in Châteauguay. Your town isn’t on the list? Call anyway.
- Vaudreuil-Dorion
- Saint-Lazare
- L’Île-Perrot
- Notre-Dame-de-l’Île-Perrot
- Pincourt
- Terrasse-Vaudreuil
- L’Île-Cadieux
- Vaudreuil-sur-le-Lac
- Hudson
- Rigaud
- Pointe-Fortune
- Très-Saint-Rédempteur
- Sainte-Marthe
- Saint-Clet
- Les Cèdres
- Pointe-des-Cascades
- Coteau-du-Lac
- Les Coteaux
- Saint-Zotique
- Rivière-Beaudette
- Saint-Polycarpe
- Saint-Télesphore
- Sainte-Justine-de-Newton
- Salaberry-de-Valleyfield
- Beauharnois
- Saint-Étienne-de-Beauharnois
- Saint-Louis-de-Gonzague
- Saint-Stanislas-de-Kostka
- Saint-Urbain-Premier
- Sainte-Martine
- Montreal’s West Island
- Châteauguay
Request an estimate
Describe the surface to redo. We reply within 24 to 48 business hours with the next steps.
- info@surfatech.ca
- Reply
- 24 to 48 business hours
- Area
- Vaudreuil-Soulanges and Beauharnois-Salaberry
- Payment
- Interac, cash, debit or credit
- Licence
- RBQ 5860-9884-01